Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Pla
ais, A.*; Bouly, F.*; Yee-Rendon, B.
Proceedings of 14th International Particle Accelerator Conference (IPAC 23) (Internet), p.4097 - 4100, 2023/09
Reliability in high power hadron accelerators is a major issue, particularly for Accelerator Driven Systems (ADS). For example, the Japan Atomic Energy Agency (JAEA) ADS maximum frequency of beam trips longer than 5 min was set to 42 per year. A significant number of breakdowns are caused by the failure of accelerating cavities or by their associated systems. Hence, we studied how these can be effectively reduced. To this end, we developed the numerical tool LightWin that aims to determine the compensation settings for any superconducting (SC) linac automatically and systematically. This tool has been successfully used for the MYRRHA SC linac. In this work, we applied LightWin to compensate for several failure scenarios involving the last section of the JAEA ADS linac and compared the associated retuned settings and beam performance to those found in a previous study with TraceWin.
Yee-Rendon, B.
Proceedings of 31st International Linear Accelerator Conference (LINAC 2022) (Internet), p.310 - 313, 2022/10
Accelerator-driven subcritical systems (ADS) offer an advantageous option for the transmutation of nuclear waste. ADS employs high-intensity proton linear accelerators (linacs) to produce spallation neutrons for a subcritical reactor. Besides the challenges of any megawatt proton machine, ADS accelerator must operate with stringent reliability to avoid thermal stress in the reactor structures. Thus, ADS linacs have adopted a reliability-oriented design to satisfy the operation requirements. This work provides a review and the present status of the ADS linacs in the world.
Yee-Rendon, B.; Kondo, Yasuhiro; Maekawa, Fujio; Meigo, Shinichiro; Tamura, Jun; Cicek, E.*
Proceedings of 12th International Particle Accelerator Conference (IPAC 21) (Internet), p.793 - 795, 2021/08
The Five-cell Elliptical Superconducting Radio-Frequency Cavities (SRFC) provide the final acceleration in the JAEA-ADS linac (from 600 MeV to 1.5 GeV); thus, their performance is essential for the success of the JAEA-ADS project. After their optimization of the cavity geometry to achieve a high-acceleration gradient with lower electromagnetic peaks, the next step in the R&D strategy is the accurate estimation of beam-cavity effects which can affect the performance of the cavities. To this end, multipacting studies were developed to investigate its effect in the cavity operation regimen and find countermeasures. The results of this study will help in the development of the SRFC models and in the consolidation of the JAEA-ADS project.
Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*
JAEA-Review 2019-027, 70 Pages, 2020/01
JAEA-Review-2019-027.pdf:5.18MB
JAEA/CLADS, had been conducting the Center of World Intelligence Project for Nuclear Science/Technology and Human Resource Development (hereafter referred to "the Project") in FY2018. The Project aims to contribute to solving problems in nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2018, this report summarizes the research results of the "Development of Technology for Rapid Analysis of Strontium-90 with Low Isotopic Abundance Using Laser Resonance Ionization". In this study, we will develop a rapid analysis technique for strontium-90 using diode laser-based resonance ionization with elemental and isotopic selectivity. Strontium-90 is one of the major difficult-to-measure nuclides released into the environment due to the accident at Tokyo Electric Power Company (TEPCO)'s Fukushima Daiichi Nuclear Power Station. Our method is particularly intended for real samples which contain high concentrations of strontium stable isotopes such as marine samples.
Yee-Rendon, B.; Kondo, Yasuhiro; Maekawa, Fujio; Meigo, Shinichiro; Tamura, Jun
Journal of Physics; Conference Series, 1350(1), p.012197_1 - 012197_7, 2019/12
Times Cited Count：2 Percentile：72.74(Physics, Particles & Fields)Yee-Rendon, B.; Kondo, Yasuhiro; Maekawa, Fujio; Meigo, Shinichiro; Tamura, Jun
Journal of Physics; Conference Series, 1350(1), p.012198_1 - 012198_6, 2019/12
Times Cited Count：2 Percentile：51.97(Physics, Particles & Fields)Yamamoto, Masanobu; Nomura, Masahiro; Shimada, Taihei; Tamura, Fumihiko; Furusawa, Masashi*; Hara, Keigo*; Hasegawa, Katsushi*; Omori, Chihiro*; Sugiyama, Yasuyuki*; Yoshii, Masahito*
Proceedings of 10th International Particle Accelerator Conference (IPAC '19) (Internet), p.2017 - 2019, 2019/06
J-PARC RCS has successfully accelerated 1 MW proton beam, and we have considered acceleration with the next target being 1.2 MW. An issue for 1.2 MW beam acceleration is the rf system. The present anode power supply is limited by its output current, and the vacuum tube amplifier suffers from an unbalance of the anode voltage swing, arising from the combination of multi-harmonic rf driving and push-pull operation. We have investigated the mitigation of the maximum anode currents and unbalanced tubes by choosing appropriate circuit parameters of the rf cavity with tube amplifier. We describe the analysis results of the vacuum tube operation for 1.2 MW beam acceleration in the RCS.
Yamamoto, Masanobu; Nomura, Masahiro; Shimada, Taihei; Tamura, Fumihiko; Furusawa, Masashi*; Hara, Keigo*; Hasegawa, Katsushi*; Omori, Chihiro*; Sugiyama, Yasuyuki*; Yoshii, Masahito*
Journal of Physics; Conference Series, 1067, p.052014_1 - 052014_6, 2018/10
Times Cited Count：3 Percentile：79.05(Physics, Particles & Fields)The J-PARC RCS employs Magnetic Alloy (MA) loaded cavities. The RF power is fed by vacuum tubes in push-pull operation. We realize multi-harmonic RF driving and beam loading compensation thanks to the broadband characteristics of the MA. However, the push-pull operation has disadvantages in multi-harmonics. An unbalance of the anode voltage swing remarkably appears at very high intensity beam acceleration. We propose a single-ended MA cavity for the RCS beam power upgrade, where no unbalance arises intrinsically.
Shimada, Taihei; Nomura, Masahiro; Tamura, Fumihiko; Yamamoto, Masanobu; Sugiyama, Yasuyuki*; Omori, Chihiro*; Hasegawa, Katsushi*; Hara, Keigo*; Yoshii, Masahito*
Nuclear Instruments and Methods in Physics Research A, 875, p.92 - 103, 2017/12
Times Cited Count：0 Percentile：0.02(Instruments & Instrumentation)Oba, Masaki; Wakaida, Ikuo; Miyabe, Masabumi
Japanese Journal of Applied Physics, Part 1, 40(1), p.357 - 358, 2001/01
Times Cited Count：1 Percentile：6.06(Physics, Applied)no abstracts in English
Kikuzawa, Nobuhiro; Nagai, Ryoji; Sawamura, Masaru; Nishimori, Nobuyuki; Minehara, Eisuke; *
Proc. of 8th Workshop on RF Superconductivity, 3, p.769 - 773, 1997/00
no abstracts in English
*; Minehara, Eisuke; *
JAERI-M 91-074, 28 Pages, 1991/05
no abstracts in English
Plaais, A.*; Bouly, F.*; Yee-Rendon, B.
no journal, ,
Reliability is a critical issue in high-power hadron accelerators, especially accelerator-driven hybrid reactors (ADS). As an example, the Japan Atomic Energy Agency-ADS (JAEA-ADS) ADS must have no more than 42 beam interruptions of more than 5 minutes per year. A significant number of failures are caused by acceleration cavities or associated system losses. These can be corrected by realigning the surrounding cavity or part of the accelerator. However, it is difficult to find a setting that compensates for failures within seconds. That's why we developed LightWin, a tool that allows you to pre-create a database of failure scenarios associated with specific linac configurations. This study presents various fault compensation strategies and his LightWin validation studies performed on superconducting linacs at MYRRHA and JAEA-ADS. We also discuss LightWin's versatility and efficiency, as well as the latest advances in low energy and high beam current compensation.
